Stubborn Clog? Blast It Away With Hydrojetting
Our high-pressure water jetting service clears even the toughest drain and sewer line blockages—without chemicals or pipe damage.
When grease, roots, or sludge bring your plumbing to a standstill, hydrojetting is the most effective solution. Yoder’s high-pressure jetting service scrubs your pipes clean using precision water streams—restoring flow, protecting your system, and eliminating buildup that traditional methods miss. It’s a fast, non-invasive solution that gets your drains moving again without unnecessary disruption.
What Is Hydrojetting?
Hydrojetting is an advanced plumbing technique that uses water pressure—up to 4,000 PSI—to clean the full interior of your pipes. It’s like a pressure washer for your drains, removing not just the clog, but the cause behind it. This process leaves your pipes clearer, smoother, and more resistant to future blockages. It also helps restore optimal flow rates by eliminating hidden obstructions deep within your system.
- Safe for most residential and commercial pipes. Compatible with a wide range of materials and pipe ages.
- Works for interior drains and underground sewer lines. Reaches blockages wherever they occur in the system.
- No harsh chemicals or excavation needed. Hydrojetting is eco-friendly and minimally disruptive. It’s a safer choice for families, older homes, and sensitive environments.
- Far more effective than snaking alone. It scrubs the entire pipe wall clean, not just a narrow path. This thorough cleaning helps prevent future clogs and odors.
When to Use Hydrojetting
Hydrojetting isn’t a last resort—it’s a smart, proactive solution when your plumbing shows signs of deeper trouble. Whether you’re facing recurring clogs or preparing for a major upgrade, recognizing the right time to jet your pipes can prevent costly emergencies. It’s also one of the most effective ways to keep high-use or aging plumbing systems flowing freely.
- You’ve had multiple clogs or slow drains in the same area. This suggests buildup or a deep blockage that hasn’t been fully cleared.
- Grease or food buildup is clogging your kitchen line. Especially common in homes and commercial kitchens with heavy use.
- You’re dealing with tree roots in your sewer line. Hydrojetting can cut through and flush out root intrusion before it spreads.
- Drain snakes provide only temporary relief. Hydrojetting clears residue and buildup that snaking leaves behind. This ensures a longer-lasting solution by fully restoring internal pipe diameter.
- You’re prepping pipes for sewer relining or replacement. Hydrojetting is the essential first step in successful pipe rehabilitation.
- You want a preventative cleaning of an older drain system. Ideal for historic homes or aging infrastructure prone to clogs.
Hydrojetting vs. Snaking: What’s the Difference?
Not all clogs require the same tool—and choosing the wrong one can mean more problems later. Each method has its own ideal use case, depending on the type and location of the blockage. Using the wrong technique can damage your pipes or leave buildup behind. A careful evaluation ensures the right tool is applied for maximum efficiency and safety. Here’s how hydrojetting and snaking compare:
- Snaking breaks a hole through a clog but leaves buildup behind. This creates short-term relief without solving the bigger issue.
- Hydrojetting removes buildup from the entire pipe wall. It restores pipes to near-original condition. This comprehensive cleaning improves long-term drainage and reduces future maintenance needs.
- Snaking is great for simple, localized clogs. Best for hair or paper near fixture drains. It’s a fast method with minimal equipment, ideal for non-recurring blockages.
- Hydrojetting is better for long-term flow and full cleaning. Especially for grease, roots, and large-scale buildup.
- We’ll recommend the best method for your specific issue. Never upselling what you don’t need. Our goal is to provide only the solution that best fits your plumbing system and budget.
Safe, Targeted Drain & Sewer Cleaning
Hydrojetting delivers industrial-grade cleaning with surgical precision—when done by the right hands. At Yoder, we treat each system with customized care, selecting tools and settings based on your pipe material and condition. Our methods reduce the risk of splashback, pipe stress, and contamination. That means cleaner pipes without compromising safety or structural integrity.
- Adjustable PSI for different pipe materials. Ensures compatibility with PVC, copper, clay, and more—without over-pressurizing.
- Controlled water direction to avoid splashback or pipe damage. Precision jetting minimizes internal turbulence and prevents misdirected force.
- Clean-out access used to avoid digging or disruption. We protect your floors and landscaping by using existing entry points.
- Sewer-safe, septic-safe, and environmentally friendly. No chemicals, no contamination—just clean, high-pressure water.
- Performed only by trained, licensed technicians. Every job follows Ohio plumbing code and manufacturer best practices.
What Types of Pipes Can Be Hydrojetted?
Hydrojetting is a versatile solution that adapts to nearly any plumbing system—residential, commercial, or municipal. Whether your pipes are made of metal, plastic, or concrete, our technicians calibrate the pressure to clean thoroughly without causing harm. This flexibility makes hydrojetting ideal for modern builds, historic homes, and everything in between. It’s a trusted method for restoring full flow, no matter the material.
- PVC and ABS plastic: Common in modern residential builds and new construction homes. These materials are durable and flexible, making them ideal for hydrojetting with minimal risk.
- Copper and cast iron: Often found in mid-century homes and commercial properties that require careful handling.
- Concrete and clay main lines: Common in older or municipal systems where buildup and root intrusion are prevalent.
- Residential kitchen, bathroom, and laundry lines: Clears grease, soap, hair, and detergent buildup that snaking can’t fully remove.
- Restaurant and commercial drain systems: Ideal for food, fat, and waste-heavy environments that demand frequent service.
- Sewer laterals and storm drains: Restores flow in outdoor or underground infrastructure without excavation.
Why Homeowners & Businesses Use Hydrojetting
Hydrojetting serves more than just emergency needs—it’s a smart, long-term investment for both homes and businesses. It clears stubborn buildup, protects your plumbing infrastructure, and helps avoid costly repairs. Property owners who stay ahead of issues benefit from fewer disruptions and better system performance. Whether you manage a home or a high-traffic property, hydrojetting has wide-reaching benefits:
- For Homeowners: Clear roots, grease, or heavy buildup from older or problematic drains. Prevent emergency calls and protect plumbing investments.
- For Restaurants & Commercial Kitchens: Remove grease, food, and soap buildup to avoid backups or inspections. Keeps your operation sanitary and compliant.
- For Property Managers: Annual hydrojetting prevents tenant complaints and costly late-night calls. Helps avoid liability and improves system longevity.
Why Choose Yoder for Hydrojetting
When it comes to hydrojetting, experience, precision, and professionalism matter. At Yoder, we combine technical skill with a commitment to customer satisfaction, ensuring your plumbing gets the safest, most effective treatment. Our reputation is built on consistent results, honest service, and deep community roots. That’s why so many homeowners and businesses across Central Ohio trust us to clear the toughest clogs.
- 20+ years of drain and sewer expertise. We’ve seen—and solved—every type of clog in homes and businesses.
- Licensed technicians who use hydrojetting safely and effectively. Trained to balance water pressure with pipe sensitivity.
- Video inspection available before and after jetting. Visual confirmation your pipes are clean and functioning properly.
- No-pressure service recommendations. We explain the best option and let you decide what fits your needs.
- Lifetime Craftsmanship Warranty on any repair work performed. Our quality stands the test of time, long after the water flows.
- Trusted by hundreds of homeowners and businesses across Central Ohio. Local, professional, and committed to every client we serve.
Areas We Serve
Whether you’re in a bustling suburb or a rural corner of Central Ohio, Yoder brings expert hydrojetting to your doorstep. We understand the local infrastructure, from modern PVC systems to aging clay lines, and tailor our solutions to match. Our crews are familiar with the plumbing quirks in each region we serve. You can count on timely, professional service wherever you call home.
- Columbus
- Grove City
- Hilliard
- Dublin
- Westerville
- Plain City
- Delaware
Blast Away Clogs, Grease, and Grime—Schedule Hydrojetting With Yoder
Clogged drains don’t wait—and neither should you. Hydrojetting is the fastest, safest, most effective way to restore your plumbing system’s full function. Yoder makes the process easy, professional, and clean. Our responsive team ensures fast scheduling and courteous service from start to finish. Book your hydrojetting service today and get flowing again.
Frequently Asked Questions
Will hydrojetting damage my pipes?
No. When performed by licensed professionals, hydrojetting is safe for most residential and commercial plumbing systems. Our team adjusts pressure settings based on your specific pipe material.
How long does it take to complete?
Most jobs are completed in 60 to 120 minutes, depending on the size of your system and severity of the blockage. We’ll give you a clear estimate before starting.
Do you use a camera to inspect before jetting?
Yes. If needed, we perform a video inspection before and after to assess blockages and ensure thorough cleaning.
How often should I schedule hydrojetting?
It depends on usage, but most homes benefit from hydrojetting every 1–2 years. Restaurants and commercial kitchens may require quarterly service.
Is this safe for older or fragile pipes?
Yes, in most cases. We evaluate the pipe’s condition first and adjust pressure to prevent damage. If we recommend another method, it’s only to ensure safety and long-term success.